Pall Bio-Inert N66 NTL (0.1 µm) Cross-Reference

Home / Cross-Reference / Pall / Bio-Inert N66 NTL (0.1 µm)
Competitor Part · Pall Ultrafilter Replacement Pharma
Switching from
Pall Bio-Inert N66 NTL (0.1 µm)?

Not every Pall Bio-Inert N66 NTL (0.1 µm) configuration has an exact Ultrafilter match. Our filtration experts review your part number and application and recommend the right replacement.

What it is: 0.1 µm modified Nylon 6,6 membrane with low protein adsorption. Pharma version with factory Certificate of Test.

Use for: Protein-containing pharma streams requiring 0.1 µm cutoff where standard Nylon adsorption would be unacceptable. Mycoplasma-grade.

Talk to a filtration expert  →

Response within one business day · No obligation

Ultrafilter · replacement on expert recommendation
4
Part numbers listed
On request
Ultrafilter replacement
Pharma
Application grade
On request
Validation documentation
Part number cross-reference

Point for point.

4 Pall part numbers listed. Ultrafilter replacement on request — talk to a filtration expert. Pall values from published datasheets.

Part Numbers Length Rating Adapter Seal
Pall SKU Ultrafilter SKU Competitor UF Code Competitor UF Code Competitor UF Code Competitor UF Code
AB1NTL7PH4 Talk to an expert → 254 mm (10") — 0.1 µm Bio-Inert Nylon — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB2NTL7PH4 Talk to an expert → 508 mm (20") — 0.1 µm Bio-Inert Nylon — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB3NTL7PH4 Talk to an expert → 762 mm (30") — 0.1 µm Bio-Inert Nylon — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB4NTL7PH4 Talk to an expert → 1016 mm (40") — 0.1 µm Bio-Inert Nylon — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
4 part numbers listed · Ultrafilter replacement on request
Technical note

Intended use.

Technical guidance only

Verify fitness for your specific application and regulatory context before qualifying any replacement.

Technical Documents
Datasheet Bio-Inert N66 NTL (0.1 µm) Datasheet
Published by Pall · opens in new tab
Why switch

Expert recommendation.
Built in Germany.

01 · Expert review

No blind swaps.

Our filtration experts compare your Pall Bio-Inert N66 NTL (0.1 µm) with the Ultrafilter range and recommend the element that fits your application.

02 · Expert support

No part number listed?

For part numbers marked “Talk to an expert”, our filtration engineers recommend the right Ultrafilter element for your housing and application.

03 · European supply chain

German manufacturing. Direct access.

Manufactured in Germany. Direct technical support, application-specific configuration, and rapid re-supply for critical filtration lines.

Ready to switch?

Talk to a
filtration expert.

Send us your Pall part number. We will recommend the right Ultrafilter replacement, spec sheet, and pricing within one business day.

Cross-reference note

Pall Bio-Inert N66 NTL (0.1 µm) is a product of Pall Corporation. Pall is a registered trademark of Pall Corporation. Ultrafilter GmbH has no affiliation with Pall Corporation. This cross-reference is provided as technical guidance only. Verify fitness for your specific application and regulatory context before qualifying any replacement.