Home / Cross-Reference / Pall / Emflon HTPFR

Competitor Part · Pall Ultrafilter Equivalent Pharma Validated

Switching from
Pall Emflon HTPFR?

The Ultrafilter PF-PT-HTDL-F is the direct equivalent. PTFE pleated membrane, double layer, high-temperature.

What it is: PTFE double-layer 0.2 µm sterilizing membrane with polyphenylene sulfide (PPS) support and drainage, oxidation-resistant polypropylene hardware. Pharma grade with factory Certificate of Test. For continuous high-temperature gas service and oxygen-enriched air.

Use for: Pharma high-temp gas applications: continuous fermenter inlet/exhaust air above 60°C, aseptic packaging, blow-fill-seal, oxygen-enriched air for bioreactor aeration.

Request a quote for the Ultrafilter equivalent →

Response within one business day · No obligation

Ultrafilter PF-PT-HTDL-F filter cartridges

Ultrafilter PF-PT-HTDL-F · PTFE pleated membrane, double layer, high-temperature

Verified Ultrafilter equivalents

PF-PT-HTDL-F

Ultrafilter equivalent family

Pharma

Application grade

Yes

Validation pack available

Part number cross-reference

Point for point.

8 Pall part numbers, each with a verified Ultrafilter equivalent. Pall values from published datasheets.

Part Numbers		Length		Rating		Adapter		Seal
Pall SKU	Ultrafilter SKU	Competitor	UF Code	Competitor	UF Code	Competitor	UF Code	Competitor	UF Code
AB05HTPFR2PVH4	PF-PT-HTDL-F···· Unlock · Quote	127 mm (5")	5	0.2 µm sterilizing	0.2 µm	SOE flat closed end, 226 O-rings	Code 2	Silicone Elastomer	Silicone
AB05HTPFR2PVJ	PF-PT-HTDL-F···· Unlock · Quote	127 mm (5")	5	0.2 µm sterilizing	0.2 µm	SOE flat closed end, 226 O-rings	Code 2	Ethylene Propylene Rubber	EPDM
AB1HTPFR7PVH4	PF-PT-HTDL-F···· Unlock · Quote	254 mm (10")	1	0.2 µm sterilizing	0.2 µm	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB1HTPFR7PVJ	PF-PT-HTDL-F···· Unlock · Quote	254 mm (10")	1	0.2 µm sterilizing	0.2 µm	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM
AB2HTPFR7PVH4	PF-PT-HTDL-F···· Unlock · Quote	508 mm (20")	2	0.2 µm sterilizing	0.2 µm	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB2HTPFR7PVJ	PF-PT-HTDL-F···· Unlock · Quote	508 mm (20")	2	0.2 µm sterilizing	0.2 µm	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM
AB3HTPFR7PVH4	PF-PT-HTDL-F···· Unlock · Quote	762 mm (30")	3	0.2 µm sterilizing	0.2 µm	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB3HTPFR7PVJ	PF-PT-HTDL-F···· Unlock · Quote	762 mm (30")	3	0.2 µm sterilizing	0.2 µm	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM

8 part numbers · 8 verified

Technical note

Intended use.

Technical guidance only

Verify fitness for your specific application and regulatory context before qualifying any replacement.

Technical Documents

Datasheet Emflon HTPFR Datasheet

Published by Pall · opens in new tab

Why switch

Verified replacement.
Built in Germany.

01 · Verified match

PTFE pleated membrane, double layer, high-temperature.

Every part number shown with an Ultrafilter number is matched for length, retention rating, end cap and seal.

02 · Expert support

No part number listed?

For part numbers marked “Talk to an expert”, our filtration engineers recommend the right Ultrafilter element for your housing and application.

03 · European supply chain

German manufacturing. Direct access.

Manufactured in Germany. Direct technical support, application-specific configuration, and rapid re-supply for critical filtration lines.

Cross-reference note

Pall Emflon HTPFR is a product of Pall Corporation. Pall is a registered trademark of Pall Corporation. Ultrafilter GmbH has no affiliation with Pall Corporation. This cross-reference is provided as technical guidance only. Verify fitness for your specific application and regulatory context before qualifying any replacement.

Pall Emflon HTPFR Cross-Reference