Home / Cross-Reference / Pall / Supor EAV

Competitor Part · Pall Ultrafilter Equivalent Pharma

Switching from
Pall Supor EAV?

The Ultrafilter PF-PES-BT is the direct equivalent. PES single-layer membrane.

What it is: Supor MachV PES membrane for bioburden reduction — not validated as sterilizing. 0.2 µm pore rating, titer reduction >6 LRV vs B. diminuta.

Use for: Non-critical process steps: protection of buffers, biological process fluids, prefiltration upstream of 0.2 µm sterilizing filters. Cost-effective when bioburden control is enough.

Request a quote for the Ultrafilter equivalent →

Response within one business day · No obligation

Ultrafilter PF-PES-BT · PES single-layer membrane

Verified Ultrafilter equivalents

PF-PES-BT

Ultrafilter equivalent family

Pharma

Application grade

Validation pack available

Part number cross-reference

Point for point.

9 Pall part numbers, each with a verified Ultrafilter equivalent. Pall values from published datasheets.

Part Numbers		Length		Rating		Adapter		Seal
Pall SKU	Ultrafilter SKU	Competitor	UF Code	Competitor	UF Code	Competitor	UF Code	Competitor	UF Code
AB05UEAV2PH4	PF-PES-BT···· Unlock · Quote	127 mm (5")	5	0.2 µm bioburden reduction	0.2 µm hydrophilic PES membrane	SOE flat closed end, 226 O-rings	Code 2	Silicone Elastomer	Silicone
AB1UEAV7PH4	PF-PES-BT···· Unlock · Quote	254 mm (10")	1	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB1UEAV7PJ	PF-PES-BT···· Unlock · Quote	254 mm (10")	1	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM
AB2UEAV7PH4	PF-PES-BT···· Unlock · Quote	508 mm (20")	2	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB2UEAV7PJ	PF-PES-BT···· Unlock · Quote	508 mm (20")	2	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM
AB3UEAV7PH4	PF-PES-BT···· Unlock · Quote	762 mm (30")	3	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB3UEAV7PJ	PF-PES-BT···· Unlock · Quote	762 mm (30")	3	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM
AB4UEAV7PH4	PF-PES-BT···· Unlock · Quote	1016 mm (40")	4	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB4UEAV7PJ	PF-PES-BT···· Unlock · Quote	1016 mm (40")	4	0.2 µm bioburden reduction	0.2 µm hydrophilic PES	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Ethylene Propylene Rubber	EPDM

9 part numbers · 9 verified

Technical note

Intended use.

Technical guidance only

Verify fitness for your specific application and regulatory context before qualifying any replacement.

Technical Documents

Datasheet Supor EAV Datasheet

Published by Pall · opens in new tab

Why switch

Verified replacement.
Built in Germany.

01 · Verified match

PES single-layer membrane.

Every part number shown with an Ultrafilter number is matched for length, retention rating, end cap and seal.

02 · Expert support

No part number listed?

For part numbers marked “Talk to an expert”, our filtration engineers recommend the right Ultrafilter element for your housing and application.

03 · European supply chain

German manufacturing. Direct access.

Manufactured in Germany. Direct technical support, application-specific configuration, and rapid re-supply for critical filtration lines.

Cross-reference note

Pall Supor EAV is a product of Pall Corporation. Pall is a registered trademark of Pall Corporation. Ultrafilter GmbH has no affiliation with Pall Corporation. This cross-reference is provided as technical guidance only. Verify fitness for your specific application and regulatory context before qualifying any replacement.

Pall Supor EAV Cross-Reference