Not every Pall Ultipor N66 NI (0.1 µm bioburden) configuration has an exact Ultrafilter match. Our filtration experts review your part number and application and recommend the right replacement.
What it is: 0.1 µm Nylon 6,6 — microbial-rated bioburden (NOT validated sterilizing). Typical B. diminuta TR >10¹⁰. Tightest bioburden grade in the family.
Use for: Tight bioburden control upstream of sterilizing filter. Process water polish where 0.1 µm cut + bioburden reduction is needed without sterilizing qualification.
Response within one business day · No obligation
8 Pall part numbers listed. Ultrafilter replacement on request — talk to a filtration expert. Pall values from published datasheets.
| Part Numbers | Length | Rating | Adapter | Seal | |||||
|---|---|---|---|---|---|---|---|---|---|
| Pall SKU | Ultrafilter SKU | Competitor | UF Code | Competitor | UF Code | Competitor | UF Code | Competitor | UF Code |
| AB1NI7PH4 | Talk to an expert → | 254 mm (10") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Silicone Elastomer | — |
| AB1NI7PJ | Talk to an expert → | 254 mm (10") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Ethylene Propylene Rubber | — |
| AB2NI7PH4 | Talk to an expert → | 508 mm (20") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Silicone Elastomer | — |
| AB2NI7PJ | Talk to an expert → | 508 mm (20") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Ethylene Propylene Rubber | — |
| AB3NI7PH4 | Talk to an expert → | 762 mm (30") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Silicone Elastomer | — |
| AB3NI7PJ | Talk to an expert → | 762 mm (30") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Ethylene Propylene Rubber | — |
| AB4NI7PH4 | Talk to an expert → | 1016 mm (40") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Silicone Elastomer | — |
| AB4NI7PJ | Talk to an expert → | 1016 mm (40") | — | 0.1 µm bioburden | — | SOE fin end, 226 O-rings, 2 locking tabs | — | Ethylene Propylene Rubber | — |
Technical guidance only
Verify fitness for your specific application and regulatory context before qualifying any replacement.
Our filtration experts compare your Pall Ultipor N66 NI (0.1 µm bioburden) with the Ultrafilter range and recommend the element that fits your application.
For part numbers marked “Talk to an expert”, our filtration engineers recommend the right Ultrafilter element for your housing and application.
Manufactured in Germany. Direct technical support, application-specific configuration, and rapid re-supply for critical filtration lines.
Send us your Pall part number. We will recommend the right Ultrafilter replacement, spec sheet, and pricing within one business day.
Cross-reference note
Pall Ultipor N66 NI (0.1 µm bioburden) is a product of Pall Corporation. Pall is a registered trademark of Pall Corporation. Ultrafilter GmbH has no affiliation with Pall Corporation. This cross-reference is provided as technical guidance only. Verify fitness for your specific application and regulatory context before qualifying any replacement.