Home / Cross-Reference / Pall / Ultipor N66 NL (0.45 µm)

Competitor Part · Pall Ultrafilter Equivalent Pharma Validated

Switching from
Pall Ultipor N66 NL (0.45 µm)?

The Ultrafilter PF-N6DL is the direct equivalent for the configurations listed below. Nylon 6,6 membrane, double layer, positive zeta.

What it is: 0.45 µm single-layer Nylon 6,6 bioburden grade. Samples retain >10⁷/cm² Serratia marcescens (the wine/beverage spoilage organism). NOT validated for B. diminuta sterilizing.

Use for: Bottled water, wine, beer pre-bottling polish at 0.45 µm cut. Bioburden ahead of 0.2 µm sterilizing. S. marcescens-specific applications.

Request a quote for the Ultrafilter equivalent →

Response within one business day · No obligation

Ultrafilter PF-N6DL · Nylon 6,6 membrane, double layer, positive zeta

Verified Ultrafilter equivalents

PF-N6DL

Ultrafilter equivalent family

Pharma

Application grade

Yes

Validation pack available

Part number cross-reference

Point for point.

9 Pall part numbers listed, 1 with a verified Ultrafilter equivalent. For the others our filtration experts recommend the right replacement. Pall values from published datasheets.

Part Numbers		Length		Rating		Adapter		Seal
Pall SKU	Ultrafilter SKU	Competitor	UF Code	Competitor	UF Code	Competitor	UF Code	Competitor	UF Code
AB3NL7PH4	PF-N6DL···· Unlock · Quote	762 mm (30")	3	0.45 µm S. marcescens validated	0.45 µm Nylon 6,6 double layer 0.45 + 0.45 µm, positive zeta	SOE fin end, 226 O-rings, 2 locking tabs	Code 7	Silicone Elastomer	Silicone
AB05NL2PH4	Talk to an expert →	127 mm (5")	—	0.45 µm double layer	—	SOE flat closed end, 226 O-rings	—	Silicone Elastomer	—
AB1NL7PH4	Talk to an expert →	254 mm (10")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Silicone Elastomer	—
AB1NL7PJ	Talk to an expert →	254 mm (10")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Ethylene Propylene Rubber	—
AB2NL7PH4	Talk to an expert →	508 mm (20")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Silicone Elastomer	—
AB2NL7PJ	Talk to an expert →	508 mm (20")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Ethylene Propylene Rubber	—
AB3NL7PJ	Talk to an expert →	762 mm (30")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Ethylene Propylene Rubber	—
AB4NL7PH4	Talk to an expert →	1016 mm (40")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Silicone Elastomer	—
AB4NL7PJ	Talk to an expert →	1016 mm (40")	—	0.45 µm S. marcescens validated	—	SOE fin end, 226 O-rings, 2 locking tabs	—	Ethylene Propylene Rubber	—

9 part numbers · 1 verified

Technical note

Intended use.

Technical guidance only

Verify fitness for your specific application and regulatory context before qualifying any replacement.

Technical Documents

Datasheet Ultipor N66 NL (0.45 µm) Datasheet

Published by Pall · opens in new tab

Why switch

Verified replacement.
Built in Germany.

01 · Verified match

Nylon 6,6 membrane, double layer, positive zeta.

Every part number shown with an Ultrafilter number is matched for length, retention rating, end cap and seal.

02 · Expert support

No part number listed?

For part numbers marked “Talk to an expert”, our filtration engineers recommend the right Ultrafilter element for your housing and application.

03 · European supply chain

German manufacturing. Direct access.

Manufactured in Germany. Direct technical support, application-specific configuration, and rapid re-supply for critical filtration lines.

Cross-reference note

Pall Ultipor N66 NL (0.45 µm) is a product of Pall Corporation. Pall is a registered trademark of Pall Corporation. Ultrafilter GmbH has no affiliation with Pall Corporation. This cross-reference is provided as technical guidance only. Verify fitness for your specific application and regulatory context before qualifying any replacement.

Pall Ultipor N66 NL (0.45 µm) Cross-Reference