Pall Ultipor N66 NN (1.2 µm particulate) Cross-Reference

Home / Cross-Reference / Pall / Ultipor N66 NN (1.2 µm particulate)
Competitor Part · Pall Ultrafilter Replacement Pharma
Switching from
Pall Ultipor N66 NN (1.2 µm particulate)?

Not every Pall Ultipor N66 NN (1.2 µm particulate) configuration has an exact Ultrafilter match. Our filtration experts review your part number and application and recommend the right replacement.

What it is: 1.2 µm Nylon 6,6 — coarsest particulate grade with β > 5000. Coarse clarification/protective filtration.

Use for: Coarse clarification ahead of finer Ultipor N66 / sterilizing stages. Protective filtration for pumps and instruments.

Talk to a filtration expert  →

Response within one business day · No obligation

Ultrafilter · replacement on expert recommendation
8
Part numbers listed
On request
Ultrafilter replacement
Pharma
Application grade
On request
Validation documentation
Part number cross-reference

Point for point.

8 Pall part numbers listed. Ultrafilter replacement on request — talk to a filtration expert. Pall values from published datasheets.

Part Numbers Length Rating Adapter Seal
Pall SKU Ultrafilter SKU Competitor UF Code Competitor UF Code Competitor UF Code Competitor UF Code
AB1NN7PH4 Talk to an expert → 254 mm (10") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB1NN7PJ Talk to an expert → 254 mm (10") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Ethylene Propylene Rubber —
AB2NN7PH4 Talk to an expert → 508 mm (20") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB2NN7PJ Talk to an expert → 508 mm (20") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Ethylene Propylene Rubber —
AB3NN7PH4 Talk to an expert → 762 mm (30") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB3NN7PJ Talk to an expert → 762 mm (30") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Ethylene Propylene Rubber —
AB4NN7PH4 Talk to an expert → 1016 mm (40") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Silicone Elastomer —
AB4NN7PJ Talk to an expert → 1016 mm (40") — 1.2 µm particulate β>5000 — SOE fin end, 226 O-rings, 2 locking tabs — Ethylene Propylene Rubber —
8 part numbers listed · Ultrafilter replacement on request
Technical note

Intended use.

Technical guidance only

Verify fitness for your specific application and regulatory context before qualifying any replacement.

Technical Documents
Datasheet Ultipor N66 NN (1.2 µm particulate) Datasheet
Published by Pall · opens in new tab
Why switch

Expert recommendation.
Built in Germany.

01 · Expert review

No blind swaps.

Our filtration experts compare your Pall Ultipor N66 NN (1.2 µm particulate) with the Ultrafilter range and recommend the element that fits your application.

02 · Expert support

No part number listed?

For part numbers marked “Talk to an expert”, our filtration engineers recommend the right Ultrafilter element for your housing and application.

03 · European supply chain

German manufacturing. Direct access.

Manufactured in Germany. Direct technical support, application-specific configuration, and rapid re-supply for critical filtration lines.

Ready to switch?

Talk to a
filtration expert.

Send us your Pall part number. We will recommend the right Ultrafilter replacement, spec sheet, and pricing within one business day.

Cross-reference note

Pall Ultipor N66 NN (1.2 µm particulate) is a product of Pall Corporation. Pall is a registered trademark of Pall Corporation. Ultrafilter GmbH has no affiliation with Pall Corporation. This cross-reference is provided as technical guidance only. Verify fitness for your specific application and regulatory context before qualifying any replacement.