Steam duty — inputs

Operating pressure

barg

Steam line pressure at the filter location — used to calculate steam density from IAPWS-IF97 saturation data.

Steam flow rate

kg/hr

Mass flow of saturated steam through the filter. From your process heat balance or flow meter.

Micron rating

Filtration grade of the P-GS element — finer grades (1 µm) have higher ΔP at the same flow.

Max acceptable ΔP (from new)

bar

Maximum pressure drop allowed across a clean new element. The tool selects the smallest housing that stays within this limit.

System design parameters

Seal material

Connection type

Saturation temperature

°C

Calculated automatically from operating pressure — not editable.

Recommended Ultrafilter selection

Smallest housing within your ΔP limit and ≤ 40 m/s

—

Engine verified against UF internal sizing workbooks — for critical or regulated duties confirm with an Ultrafilter engineer.

Housing

P-EG

stainless steel steam housing

Element

—

ΔP from new

—

of your max ΔP

—

outlet pressure

—

steam velocity

Over ΔP limit

—

ΔP—

Velocity—

✓ Recommended

—

ΔP—

vs your limit ▲

Velocity—

vs 40 m/s ▲

Buffer option · one size up

—

ΔP—

Velocity—

Get a quote → P-EG housing datasheet Element datasheet

Engine: IAPWS-IF97 steam properties · Sizing per Ultrafilter internal standard · For critical duties always confirm with an Ultrafilter engineer.

Steam filter sizing.